锁紧气缸控制回路设计

介绍了锁紧气缸的结构、锁紧方式和几种基本的控制回路,给出了气缸两腔压力平衡状态下输入气压的关系。     

灌注混凝土桩施工方法及工艺的探讨

通过对钻孔灌注桩与沉入桩的对比分析,得出了钻孔灌注桩的优点,并且详细介绍了钻孔灌注桩的施工工艺和方法,总结了提高灌注混凝土桩承载力的方法和灌注桩的检测手段及一般事故处理方法,以供今后类似工程实践参考.     

瓦村枢纽下游引航道通航水流条件试验研究

为保证船闸口门区有利于通航的良好水流条件,采用整体定床物理模型对瓦村枢纽船闸下引航道及口门区通航水流条件进行研究。试验结果表明:受电站下泄尾水扩散及尾水渠出口右岸边坡挑流的影响,下引航道口门区水流流态较差,纵横向流速明显超标,不满足船舶安全航行要求。探讨了延长导航墙长度、扩挖尾水出口右岸边坡、增设隔流墩等措施对水流条件的影响,经模型方案比选及优化,确定了下引航道布置推荐方案,较好地解决了口门区横流较大的问题,使下引航道及口门区的水流条件满足船舶安全通航要求。     

大直径钢管桩承载力恢复过程试验研究

针对目前预制桩承载力恢复特性研究与工程应用中的不足,依托西非某海工工程,提出高应变法。采用对同一钢管桩进行初打与不同休止时间复打相结合的试验方法,研究了大直径钢管桩沉桩后的承载力恢复过程。结合地质情况、沉桩与试验结果,得到了钢管桩承载力、侧阻力及端阻力随时间变化的一般规律及影响因素,并通过静载试验对研究结果进行了验证。该研究在提高项目施工效率、降低成本的同时,还得到了有意义的规律与结论,可为后续类似项目提供参考。     

长江航道承载力概念研究

以国家号召发展长江航道为背景,在生态航道建设的基础上,首次提出以满足生态效益需求为核心,兼顾经济社会发展、长江水资源综合利用等多种目标,实现长江航道建设可持续发展的长江航道承载力概念。借鉴资源承载力理论体系,运用系统理论、协同理论等理论对航道承载力系统的结构关系进行分析,并提出航道承载力的定义、内涵、特征及航道承载力发展机制。     

Autonomous cars: The tension between occupant experience and intersection capacity

Systems that enable high levels of vehicle-automation are now beginning to enter the commercial marketplace. Road vehicles capable of operating independently of real-time human control under an increasing set of circumstances will likely become more widely available in the near future. Such vehicles are expected to bring a variety of benefits. Two such anticipated advantages (relative to human-driver vehicle control) are said to be increased road network capacity and the freeing up of the driver-occupant’s time to engage in their choice of leisurely or economically-productive (non-driving) tasks.In this study we investigate the implications for intersection capacity and level-of-service of providing occupants of automated (without real-time human control), autonomously-operating (without vehicle-to-X communication) cars with ride quality that is equivalent (in terms of maximum rates of longitudinal and lateral acceleration) to two types of rail systems: [urban] light rail transit and [inter-urban] high-speed rail. The literature suggests that car passengers start experiencing discomfort at lower rates of acceleration than car drivers; it is therefore plausible that occupants of an autonomously-operating vehicle may wish to instruct their vehicle to maneuver in a way that provides them greater ride comfort than if the vehicle-control algorithm simply mimicked human-driving-operation.On the basis of traffic microsimulation analysis, we found that restricting the dynamics of autonomous cars to the acceleration/deceleration characteristics of both rail systems leads to reductions in a signalized intersection’s vehicle-processing capacity and increases in delay. The impacts were found to be larger when constraining the autonomous cars’ dynamics to the more-restrictive acceleration/deceleration profile of high-speed rail. The scenarios we analyzed must be viewed as boundary conditions, because autonomous cars’ dynamics were by definition never allowed to exceed the acceleration/deceleration constraints of the rail systems. Appropriate evidence regarding motorists’ preferences does not exist at present; establishing these preferences is an important item for the future research agenda.This paper concludes with a brief discussion of research needs to advance this line of inquiry.     

相继增压系统对改善船用直列八缸发动机性能的试验研究

随着大型柴油发动机经济性和排放要求的不断提升,以及对发动机稳态、瞬态特性要求的不断提高,传统的涡轮增压系统已无法满足船用发动机全工况性能的要求。为了提高产品竞争力和适配性,针对某8缸直列船用柴油发动机开发了带有定压排气管的相继增压系统,并进行了发动机台架试验研究。结果表明：发动机中、低转速时,相继增压系统使发动机比油耗可以下降5%-10%,排气温度降低30%-45%,烟度下降55%-60%；最大扭矩可以提升15.1%-36.4%；发动机最大扭矩转速工况突加突卸响应性提升约28%-29%；相继增压系统中定压排气管的设计使得发动机高工况性能也有所提升,从而实现发动机全工况性能的提升。     

Development and calibration of a long-distance passenger traffic assignment model

This paper studies the assignment of long-distance passenger traffic on a highway corridor network. First, we propose a traditional model for the long-distance traffic assignment considering interactions with local commuter traffic. It addresses the effect of local networks on highway corridors. An iterative algorithm is developed to solve for the exact solution. Then, to address the potential computational issues that arise therein, a decomposition method is proposed by introducing a new concept of corridor elasticity. An assignment procedure for long-distance passenger traffic is developed accordingly. Numerical tests show that the proposed decomposition method makes significant improvements in computational performance at a small loss of optimality. This decomposition method well approximates the exact assignment from the traditional formulation, especially when the highway corridors are near-saturation. The proposed decomposition method appears practical for application.     

嵌岩桩竖向承载力预测方法

现行规范计算方法不同、参数取值不一,导致各类设计方案差异较大。基于收集的193组嵌岩桩静载试验数据,对各类极限侧阻力、端阻力预测方法的适用性进行研究,分别建立了不同岩石类型极限侧阻力、端阻力与岩体无侧限抗压强度的关系。在此基础上,给出了嵌岩桩竖向承载力的建议计算方法。结合试验实测资料验证了推荐方法的可行性,并与现行规范方法进行比较。结果表明,对于硬质岩层嵌岩桩竖向承载力的确定,现行规范方法计算结果偏大,用于工程设计时偏于危险,建议采用推荐的计算方法。     

西津水利枢纽二线船闸下游引航道右岸支流汇入口消能设施设计

西津水利枢纽二线船闸工程是建设"西江亿吨级黄金水道"的重要举措之一。为研究二线船闸下引航道停泊段右岸西竹坑支流的汇入对二线船闸下引航道内通航水流条件的影响,通过水工模型试验研究在支流沟内布置消能设施对支流入汇口处流速、流态的影响,提出斜向导流坝、消力墩和消力池的工程措施,为类似工程提供借鉴。